WCDS "Outlaw 300" Rules
(1) Tree: .4 Pro Light, Heads-Up
Any door car (wagons permitted, convertibles permitted with the top
on) 1:24 or 1:25 Model kit or promo car (Hard Body) no styrene or resin bodies. All makes and models factory 4 Seater Passenger
car that came from the factory with rear seat and rear belts, if I am not sure I will ask you to show factory part numbers
for the belts.
Sanding rocker panels permitted, must see bottom of door seam.
Any scale or induction hood scoops
Front spoiler permitted "must be less then .010 In front of front bumper. Filling in grill area permitted,
head light must be in stock location.
Rear spoiler permitted (can be styrene) maybe as wide as the body but no longer
then 1.120" from Back of deck lid. Max hight from deck lid .150".
Add-on rear wing Prohibited, factory wing
Opening of rear bumper to clearance wheelie bar upright (no more then .400" tall by 1.5" wide)
Must has 3-Dimensional
1:24 scale painted interior.
No paper or flat interior allowed. If all windows are present and black no interior needed.
Front and rear windshield
mandatory, Lexan side windows permitted.
Any axel permitted
Axle bearings permitted
Guid flag 1" max
(5) Wheelie bar length:
5.0 inch max from center of rear axel.
Front wheels Scale, Hub O-ring type or O.E.M. Rear wheels
Scale Hub .300 wide +\-0.0
1.000 Minimum Tall
(8) Minimum weight: 110 grams
*(9) Motor: Hawk 7 JK30307, must have factory marking
"H7 7777777" on the motor.
Freezing of motor prohibited.
Painting of engine prohibited.
2 motors will be allowed at tech-in.
Any Comm Drops permitted.
Motor is crimp and can not be opened, pry marks,
modified or altered in anyway. If motors is altered driver will be disqualified from the event.
You can change motors
anytime during the race but must be done in tech, must let tech know when changing motor to inspect new motor.
(10) Track prep:
Racer has 60 second clock to clean and prep track
to the 330 cone.
1 Dry hop
If you have any question
just please ask.