WCDS Outlaw 10.5

WCDS Outlaw 10.5

E.T Record Held By Mike AAceves at .741 6/18/2016

MPH Record Held By Mike AAceves at 77 6/18/2016

Body:
Any American V-8 powered passenger car. Opening rear lower bumper area to clearance wheelie bar uprights (no more then .450" tall by 1.5" wide) permitted. Sealing off of frontal openings permitted (I.e. grills areas and fresh air ducts) as long as It does not change the geography or shape of the front end. Front and Rear windshield must be OEM plastic. No chopping of roof or slanting of windshield. Lexan side glass OK. Body Must be kit or promo based. ...No Styrene or Resin allowed. Firewall, Core support and Fender wells may be removed for Clearance. Door rocker sills may be shaved to lower overall body profile, but lower OEM door lines must be intact.
CHEVROLET EL CAMINOS AND FORD RANCHEROS ALLOWED, Corvettes and
Thunderbirds also allowed.

Cowl hoods, P/S hoods and or
Blower detail OK-

Interior:
Must have 3 dimensional
scale painted interior. No Paper or flat interiors allowed.

Wing:
Wing may be as wide body and no longer then 1.120" off back of deck lid. Wing must be styrene lexan wings are not allowed.

Chassis:
Any INLINE chassis with axle bearings. No more then 5" distance
from wheel axle to wheelie bar axle.

Rear Tire
Scale Hub (.625+ diameter)
Tire: 1.120" tall (Minimum) by .435 (Maximum)

Front wheel:
Hub must be .625"+ with Oring that is .100" in thickness. No modification of o-ring to lower body. Any wheel of smaller Diameter found being used in effort to lower front of car is illegal.

Motor:
ProSlot VR-12: Part Number PS4019 (Bushing Motor) *All VR Prostock motor specs apply, other then a VR12 arm is required.

-Arms and Magnets will be metered/checked for size and legality.

*Weight: 115 grams-

*guide flag may not be longer then 1"

Full name:

Email address:

If you have any questions just ask:

West Coast Drag Syndicate, Heads-Up Drag Racing Slot Cars

.